AC Service Checklist for AMC Visits (Free Printable and Excel)
An AC service checklist is the list of checks a technician works through on every maintenance visit: clean the filters, check the coil fins, the drain and the outdoor unit, test the cooling, and record the parts used and the customer's sign-off. Below is a free AC service checklist for AMC visits on split and window air conditioners, as a printable Word file and an Excel sheet, with one sheet per unit per visit and a visit log that builds up over the year.
Most AC maintenance checklists online are written for home owners in the US. This one is written for Indian service businesses that sell annual maintenance contracts (AMCs) on air conditioners, and for the technicians who carry out the visits, so it ends with the two things an AMC business needs on record after every visit: what parts were used, and whether the customer pays for them.
Download the AC service checklist (free, no sign-up)
- AC service checklist in Excel (.xlsx): 15 checks with a Done, OK, Not OK or Not applicable drop-down, a count of items checked and items Not OK, and a visit log sheet for the year
- Printable AC service checklist in Word (.docx): the same checks with tick boxes, for technicians who fill it on paper
Always follow the manufacturer's manual for the specific model. The checklist is a starting point, not a replacement for it.
What an AC service checklist for an AMC visit should cover
A preventive maintenance visit on an air conditioner has the same job every time: keep air flowing through the unit, keep water draining out of it, and catch a fault before it becomes a breakdown call. Manufacturers put the air filter first for a reason. Daikin India recommends cleaning the filter about once every two weeks during daily use, and estimates that an air conditioner whose filter has not been cleaned for a year may use about 25% more electricity than one with a clean filter.
The checklist below covers the indoor unit, the outdoor unit, a test run and the record of the visit. It works for split ACs as written; for a window AC, the outdoor checks apply to the condenser coil and fan at the rear of the same unit.

The AC service checklist, step by step
| Section | Check | Why |
|---|---|---|
| Before you start | Switch off the AC and isolate power at the plug or breaker | Prevents electric shock while cleaning |
| Indoor unit | Remove the air filters, vacuum off dust; if heavily soiled, wash in water with mild detergent (not above 40 C), dry in shade, refit | A clogged filter restricts airflow and raises power use |
| Indoor unit | Inspect the aluminium fins (evaporator coil) behind the filter; clean if dusty | Dust on the fins slows cooling; filter cleaning alone does not reach them |
| Indoor unit | Check the air inlet and outlet are not blocked | A blocked inlet or outlet is a common cause of poor cooling |
| Indoor unit | Check the condensate drain pipe and tray; clear any blockage | A clogged drain leads to water leaks and mould |
| Indoor unit | Check remote batteries and that cooling mode is set | Rules out a simple cause before a complaint becomes a call |
| Indoor unit | Note any blinking lamp or error code on the display | The code tells the next technician where to start |
| Outdoor unit | Clear leaves, dirt and debris around the outdoor unit | Debris reduces airflow over the condenser |
| Outdoor unit | Inspect condenser fins; straighten bent fins with a fin comb | Bent fins block airflow through the coil |
| Outdoor unit | Check the condenser fan blades for cracks or damage | Damaged blades reduce efficiency |
| Outdoor unit | Check the refrigerant level; if low, look for a leak and record it | Low refrigerant can mean a leak, which is a repair job |
| Window AC | Check the condenser coil and fan at the rear of the unit from outside | On a window AC both halves are in one box |
| After service | Restore power, run in cooling mode, confirm cool air and no water leak | Confirms the visit left the unit working |
| After service | Record parts used (or None) and whether they are chargeable under the contract | Settles the parts bill before the customer asks |
| After service | Take a photo of the cleaned unit and get the customer's sign-off | Proof the visit happened, if the customer disputes it later |
Indoor unit checks
Start with power off. Daikin's own cleaning steps are to open the front panel, remove the filter, vacuum the dust off, and only if it is heavily soiled, wash it in water with a little mild detergent, rinse, and let it dry completely in the shade before refitting it. Daikin also warns against water hotter than 40 C, solvents such as benzine or thinner, and hard sponges, all of which can deform or damage the filter.
Behind the filter are the aluminium fins of the evaporator coil. Daikin points out that these cannot be cleaned through filter maintenance alone and that heavily soiled fins should be cleaned by a qualified service technician, which is exactly the work an AMC visit is for. Then check the air inlet and outlet for anything blocking them and look at the display: Daikin's product care page lists a clogged filter or a blocked inlet or outlet as the first things to check when a red lamp is blinking or cooling is poor.
The drain is the check most often skipped. TCL India's maintenance tips note that a condensate drain line clogged with dirt leads to leaks and water damage, so check the drain pipe and the tray on every visit.
Outdoor unit checks
Clear leaves and dirt from around the outdoor unit, inspect the condenser fins and straighten bent ones with a fin comb, and check the fan blades for cracks. TCL lists all three as routine checks. Refrigerant is different: low refrigerant can indicate a leak, so the checklist asks the technician to record it rather than simply top up, because a leak is a repair and may not be covered by the contract.
Test run and record
Restore power, run the unit in cooling mode and confirm cool air from the indoor unit and no water from the drain side. Then record the parts used, whether they are chargeable under the customer's contract, take a photo of the cleaned unit, and get the customer's signature. Those last lines are what make this an AMC checklist rather than a cleaning list.
How often should an AC be serviced under an AMC?
There is no single rule; it is set by the contract. Many AC AMCs promise a fixed number of preventive visits a year, for example 4 visits, one every 3 months. Filter cleaning is more frequent than that: Daikin recommends about once every two weeks during daily use, which the customer or their staff can do between visits. A sensible AMC tells the customer so, and uses each scheduled visit for the work a customer cannot do themselves: the coil fins, the drain, the outdoor unit and the refrigerant check.
If you are deciding what the contract itself should promise, the guide on AMC types and what each covers explains comprehensive, non-comprehensive and labour-only contracts, and the free AMC quotation format has ready scope lines for AC maintenance.
How to use the Excel checklist
The workbook has three sheets:
- Visit checklist: the contract number, customer, site, unit type, make, model and serial number at the top, then the 15 checks, each with a Result drop-down (Done, OK, Not OK, Not applicable) and a notes column. Two cells count the items checked and the items marked Not OK. Below that are parts used, chargeable or not, next visit due, and both signatures. Make one copy of the sheet per unit per visit.
- Visit log: one row per visit for the year, with the unit, technician, items Not OK, parts used, chargeable, next visit due and whether a photo was taken. This is the record you show a customer who says a visit never happened.
- Sources: the manufacturer pages the checks are based on.
The Word version is the same checklist with tick boxes, for technicians who fill it on paper and hand a copy to the customer.
From a paper checklist to a visit record
A checklist on paper works until there are dozens of AMC customers. Then the questions become which visits are due this month, which are overdue, and where the photo from a visit three months ago went. That is the part a sheet in a technician's bag cannot answer.
In Fuzen AMC Hub, each contract builds its own visit schedule, and the Visits page lists the visits due this month grouped by technician, with overdue visits shown separately. To close a visit, you click Complete, check the date and technician, edit Work done (it comes filled in with the usual checklist for that service), add the parts used and attach photos, then click Mark completed. The visit moves to Completed, the contract's other visits stay as they were, and the photo can be viewed later from the completed visit. The AMC Hub visits guide walks through it.

Keep every AC visit on record
Fuzen AMC Hub keeps your contracts, visit schedules, completed visits with photos, breakdown calls, invoices and renewals in one place. See how AMC Hub works.
Frequently asked questions
What is included in AC service?
A routine AC service covers cleaning the air filters, checking and cleaning the coil fins, clearing the condensate drain, checking the air inlet and outlet, clearing debris around the outdoor unit, checking the condenser fins and fan blades, checking the refrigerant level, and a test run in cooling mode. On an AMC visit, the technician also records parts used and gets the customer's sign-off.
How often should AC filters be cleaned?
Daikin India recommends cleaning the filter about once every two weeks during periods of daily use. A clogged filter restricts airflow, so the unit uses more electricity to deliver the same cooling.
What is an AC preventive maintenance checklist?
It is the list of checks done on a scheduled visit to keep an air conditioner working before anything breaks: filters, coil fins, drain, outdoor unit, fan, refrigerant level and a test run. The free checklist on this page is built for AMC visits on split and window ACs.
Is the checklist different for a window AC?
The checks are the same, but on a window AC the condenser coil and fan sit at the rear of the same unit rather than in a separate outdoor unit, so the outdoor checks are done from outside the window.
Should the technician top up refrigerant on every visit?
No. Low refrigerant can mean there is a leak. The checklist asks the technician to record a low level and look for the leak, because fixing a leak is a repair, and whether it is covered depends on the customer's contract.
Why record parts used on a maintenance visit?
Because the contract decides who pays for them. On a comprehensive AMC parts are usually included; on a non-comprehensive or labour-only AMC the customer usually pays. Recording the parts and whether they are chargeable on the visit sheet settles the bill before the customer asks.